Topic starter
❓ Does anyone out there have a copy of the stc for metalizing a Stinson 108-3?
I have mechanic aquaintance who has a customers a/c with no paperwork and needs a copy. He also needs to find out what the washout on the wings is. He says that with the metal on it it is impossible to rig the wing neutral then turn the rear strut fork out 5 turns as the book says for a fabric a/c. It has 1.9 degrees of washout now, but could be raised or lowered slightly.
I certainly do not agree with metallizing a good fabric covered aircraft, but apparently this one had already been metallized.
Dale Jewett
Dale P. Jewett
NC23792
1939 Stinson HW-75
S/N: 7247
Posted : 03/04/2006 10:55 pm
Do you know what metal lit it has on it?
Mine is a Met-co-air conversion and I have the paperwork that you could copy.
Shane
Shane Horton
343"Charlie"
108-2
Posted : 04/04/2006 2:00 am
Hello
Would you be willing to scan and send me copies of your met co metal paperwork
Thank you
Justin
Posted : 26/04/2021 1:20 am
Would your drawings apply to Skycraft Designs metal STC. Mine was done in 1966, I have the STC but thats about it.
Posted : 26/04/2021 8:28 am
BTW, I found this article about Skycraft Designs. Interesting read, https://books.google.co.jp/books?id=W4wWtLnMtKoC&pg=PA56&lpg=PA56&dq=Skycraft+Design,+Stinson&source=bl&ots=7JeQYyk9bF&sig=ACfU3U2yFiHUw5Dsp2qjCUXRngiwTkc_Kg&hl=en&sa=X&redir_esc=y#v=onepage&q=Skycraft%20Design%2C%20Stinson&f=false
Posted : 26/04/2021 8:32 am
