Airframe
10
Posts
4
Users
6
Likes
292
Views
Topic starter
Anyone have drawing Dwg 108-3002260 for the baggage compartment?
Wanting to install a baggage compartment on my son's straight 108. Some copies of 337's would be helpful too. I have one copy from the archives. Starting the work for the Field Approval.
Thanks
Posted : 26/02/2022 1:04 pm
There are two baggage compartments. One is bolt in, like retrofit, one is weld in like a production airplane. The drawings are different. Univair has both drawings, though.
I would argue that much like copilot brakes, a field approval is not necessary. The drawings are approved data.
This post was modified 1 year ago by resto108
Posted : 26/02/2022 3:48 pm
There were as many as four Stinson 108s which had been field approved to relocate the wall behind the passenger seats. The control cables got new pulleys further back and a large baggage door installed. I worked on one but the owner said modern day FAA would have a problem with relocating control cables. That's what would be worth it however, makes them really capable!
Wade
I have pictures
Posted : 27/02/2022 7:11 am
Topic starter
I missed the drawing on Univair. I'll take another look.
Thank you
Posted : 27/02/2022 12:08 pm
Doubt its on the website, you'll have to call them.
Posted : 27/02/2022 12:34 pm
There were as many as four Stinson 108s which had been field approved to relocate the wall behind the passenger seats. The control cables got new pulleys further back and a large baggage door installed. I worked on one but the owner said modern day FAA would have a problem with relocating control cables. That's what would be worth it however, makes them really capable!
Wade
I have pictures
LUV to see those pictures
Posted : 27/02/2022 2:41 pm
Doubt its on the website, you'll have to call them.
Yeah I dont think I have any drawing like that in the tech section. If anyone gets a scanned PDF of any drawing from Univair I would LUV to have them so I can add them to our ISC collection
Posted : 27/02/2022 2:43 pm
Douglas Evenson and Douglas Evenson reacted
It's not letting me post the field approved large baggage door.
You could email me
wademodrow@outlook.com
Posted : 02/03/2022 12:31 am
The drawing for the retrofit kit (bolt in) baggage compartment is 108-3912000. The drawing for the production (weld in) baggage compartment is 108-3002260.
Posted : 02/03/2022 1:33 am
Topic starter
I've talked to Univair twice looking for either the bolt in or weld in baggage drawings. No joy...
Any other suggestions?
Posted : 30/03/2022 3:45 pm
