1/2” Fuel Line Rout...
 
Share:
Notifications
Clear all

1/2” Fuel Line Routing Reference Photos

orange4sky
Trusted Member

Reference photos:

Top of the door. There was an aluminum sheet protecting the line on the left where the sheathing is shiny. 

image

Marcus Sabathil: Owner of Skookumchuck Voyageur 108

Quote
Topic starter Posted : 11/04/2021 8:38 pm
orange4sky
Trusted Member
image

The bottom, obviously.

Marcus Sabathil: Owner of Skookumchuck Voyageur 108

ReplyQuote
Topic starter Posted : 11/04/2021 8:48 pm
Will Ware (Webmaster ISC)
(@stinsono)
Member Admin

Funny timing, bc I was working on this exact thing on my 108-1. Someone mangled them when they removed them so I have been cleaning, inspecting, straightening and resending them all day. 

ReplyQuote
Posted : 12/04/2021 2:55 am
orange4sky
Trusted Member

@stinsono

I posted these because you asked in the windshield thread. 😉

I'd send you these ones if you want them. I'm redesigning my fuel system anyway. They would need to be re-bent in a couple of places. Very easy to anneal with a torch. Sharpie on them and carefully heat till the sharpie disappears. They are band new and certified from Univair. Maybe I can get them into the windshield box if you end up ordering one.

Marcus Sabathil: Owner of Skookumchuck Voyageur 108

ReplyQuote
Topic starter Posted : 27/04/2021 1:02 am
Share: