Andrew Liebfried
Andrew Liebfried
@aliebfriedearthlink-net
Eminent Member
Joined: Jul 28, 2020
Last seen: Nov 2, 2022
Topics: 4 / Replies: 20
Reply
RE: Mixture linkage at Carb

The correct bolt and washer, set up correctly allows bolt to turn while actuating the control. If the hole in the bolt is drilled correctly and you do...

4 months ago
Reply
RE: MA3SPA Carb

The operation of the accelerator pump is super easy, just open throttle quickly fuel pours out. Yes the ball is swedged in place, all normal. Why do y...

7 months ago
Reply
RE: Franklin oil screen

Airwolf has the kits but the price is creeping up. Best investment you can get for your plane next to regular flying. I suggest using cam guard once i...

8 months ago
Reply
RE: Cold Blooded?

Sounds like you found the smoking gun. All conventional magnetos need a 500 hr inspection. Points and brushes wear, timing then drifts, parts break. A...

8 months ago
Reply
RE: Cold Blooded?

@rileypowers88gmail-com Yes, 6 times for two revolutions. Check to make sure actually are seeing a spark. Don’t just hope because you hear the impulse...

8 months ago
Reply
RE: Cold Blooded?

Since no one will I’ll bite. Let’s start with the basics, what did your mechanic say? If you don’t have one experienced with Stinsons find one. Not...

8 months ago
Reply
RE: Goodyear Brake MC Parts

The answer lies in the TCDS header for the 108-3 "(Same as Model 108-2 except for larger fuel...)" This statement in the TCDS is proclaims these aircr...

11 months ago
Reply
RE: Should I get an engine monitor & install an oil filter kit?

Sounds like you need a discussion with your A&P who is signing off your work. On certified aircraft Maintenance repair and overhaul requires knowl...

11 months ago
Reply
RE: Transporting my first plane

A trailer is easiest to work with, nose forward, use tarps and tape to seal openings. Use lots of packing, I like home depot but the more the better. ...

11 months ago
Reply
RE: Wing Washout and flight characteristics

Karl, When ever I rig a plane I like to start at factory zero, verify my T&B is right then test fly. Always make sure the ball is center when noti...

1 year ago
Forum
Reply
RE: aileron hinges

Last set I took off (a month ago) I used a 1/4 drive set up. No wrenches. Breaker bar on one side ratchet on the other. Hard to be sure but it looks l...

1 year ago
Forum
Reply
RE: aileron hinges

@rhrichtsgmail-com Is the problem removing the nut or the bolt?

1 year ago
Forum
Reply
RE: Landing Gear Shock Struts

@t-chamberlain I made the mistake of ordering new springs. Two years later she was sagging. Pulled struts, measured them up added washers back-in busi...

1 year ago
Reply
RE: Landing Gear Shock Struts

Just did mine, second time in 20 years. Both sides sagged same amount. Used tech info from this web site for detailed instructions. Yes check all the ...

1 year ago
Page 1 / 2